Texas Instruments TITANIUM TI-89 - Manual (Page 459)

Tables 459
• Set Graph < - > Table and Independent by using the setTable function. Refer to the
Technical Reference module.
Displaying an Automatic Table Displaying an Automatic Table Displaying an Automatic Table Displaying an Automatic Table
If Independent = AUTO on the TABLE SETUP dialog box, a table is generated
automatically when you display the Table screen. If Graph < - > Table = ON , the table
matches the trace values from the Graph screen. If Graph < - > Table = OFF , the table is
based on the values you entered for tblStart and @ tbl .
Before You Begin Before You Begin Before You Begin Before You Begin
Define and select the applicable functions on the Y= Editor ( ¹ #). This example uses
y1(x) = x
3
N x/3 .
Displaying the Table Screen Displaying the Table Screen Displaying the Table Screen Displaying the Table Screen
To display the Table screen, press ¹ ' or O
5 .
The cursor initially highlights the cell that contains the starting value of the independent
variable. You can move the cursor to any cell that contains a value.
Then enter the initial table parameters
(
¹ &).