beautypg.com

2 unplug the power cable from the ac outlet, 4 remove the power supply unit, Extend the hooks – Toshiba Magnia Z300 User Manual

Page 97

background image

Installing and Removing Hardware

Memory module

75

Before installing an additional memory module, carefully read
“Before starting operation” on page 48 and proceed as follows:

1 If the server is in operation, first shut it down and switch off the

power supply to it.

2 Unplug the power cable from the AC outlet.

NOTE: Installing a memory module while the server is still
operational could cause damage to the server or the memory
module.

3 Remove the outer covers and server panels from the server.

See “Removing and replacing the server panels” on page 54.

4 Remove the power supply unit.

See “Power Supply Unit” on page 69.

5 Extend the hooks on both sides of the memory slot outwards.

Extend the hooks