Toshiba Magnia Z300 - Manual (Page 178)

System Configuration Setup
Remote Management and Front Panel Display Setup Tool 156
Remote Management and Front Panel Display
Setup Tool
The Remote Management and Front Panel Display Setup Tool is
used for setting/updating information for enabling remote man-
agement on the NetWare environment, and for setting display
characters on the front panel display.
When using Remote Management and Front Panel Display Setup
Tool, create a floppy disk from the Toshiba Server Setup Tool.
How to start up and operate the setup tool
Insert the floppy disk created using Toshiba Server Setup Tool into
the floppy disk drive, and start up the system. The following selec-
tion screen appears. In this screen, select the desired menu.
To set up the LAN environment
When the menu appears, select 1 TOSHIBA Remote Manage-
ment Setup Tool.
The following selection appears.
1 TOSHIBA Remote Management Setup Tool
2 TOSHIBA Front Panel Display Setup Tool
Enter a choice : 1
TOSHIBA Setup Remote Management Setup Tool Version x.xx
COPYRIGHT TOSHIBA CORPORATION 2001. ALL RIGHTS RESERVED.
*** Current Remote Management Setup Data ***
LAN1 IP Address = nnn.nnn.nnn.nnn
Subnet Mask = nnn.nnn.nnn.nnn
LAN2 IP Address = nnn.nnn.nnn.nnn
Subnet Mask = nnn.nnn.nnn.nnn
*** Please Select Menu ***
[1] Setup LAN1 IP Address
[2] Setup LAN2 IP Address
[3] Setup LAN1 Subnet Mask
[4] Setup LAN2 Subnet Mask
Please Input ([1]-[4] or [Esc])>>