Toshiba Magnia Z300 - Manual (Page 211)

Installing Software
NetWare
189
1 Select “Select an additional driver.”
2 Set the floppy disk labeled “MegaRAID Drivers & Utilities for
SeriesXXX NetWare/MS-DOS” (supplied with the RAID
Controller) in the floppy disk drive.
3 Select “Install an unlisted driver ” by pressing the
key.
4 Press the key and specify the following directory under
the floppy disk drive.
A: \NetWare\NW5
5 Press the key to retrieve drivers contained in the
floppy disk.
6 When the driver list appears, select the following driver.
7 Input slot Number “1” to MEGA4_XX Parameters.
Proceed with installing operation, following the instructions that
appear on the screen.
Selecting the Onboard Network Adapter driver
Use the following file contained on the Intel LAN driver for Net-
Ware created with the Toshiba Server Setup Tool as the Onboard
NetWare Adapter driver.
A: \NWSERVER\E100B.LAN
1 Select “Install an unlisted driver ” by pressing the
key.
2 Press the key and specify the following directory under
the floppy disk drive.
A: \NWSERVER
3 Press the key to retrieve drivers contained in the
floppy disk.
|| MEGA4_XX.HAM || Netware NWPA HAM Driver for MegaRAID ||