Toshiba Magnia Z300 - Manual (Page 173)

System Configuration Setup
SCSI Utility
151
Starting the SCSI Utility
When the server is turned on or restarted, the monitor displays the
onboard SCSI BIOS initialize message shown below. The display
differs based on the type of SCSI device installed in the server.
When the settings are correct, the SCSI ID and device name of the
SCSI device connected to the onboard SCSI controller appear on
the screen. To start the SCSI Utility, after the message “Press
+ for SCSI Select (TM) Utility!” appears on the
screen, press the + keys.
Adaptec AIC-7892 SCSI BIOS vX.XX
(C)1998 Adaptec, Inc. All Rights Reserved.
<+ for SCSI Select(TM) Utility!>>