Toshiba Magnia Z300 - Manual (Page 204)

Installing Software
NetWare 182
6 Input Slot Number “10008” to MEGAIDE property.
Proceed with installation by following the instructions that appear
on the screen:
Selecting the SCSI Riser card driver
The installer detects the SCSI controller, and the following menu
appears.
Select “Modify,” and replace the driver according to the following
procedure:
1 Move the cursor to “Storage adapters” on the menu shown
above with the arrow keys, and press the key.
The following drivers were detected for this
server. Add, change,or delete device drivers as
needed.
Device types Driver names
Platform Support Module: MPS14
HotPlug Support Module: (optional)
Storage adapters ADPT160M,
IDEATA
options
_Continue
_Modify