Toshiba Magnia Z300 - Manual (Page 210)

Installing Software
NetWare 188
A: \NetWare
5 Press the key to retrieve drivers contained in the
floppy disk.
6 When the driver list appears, select the following driver.
Proceed with installing operation, following the instructions that
appear on the screen.
Selecting the SCSI Riser Card Controller driver
Follow the procedure mentioned below:
1 Move the cursor to “Select additional or modify selected Disk/
LAN drivers” on the screen shown above with the arrow keys,
and press the key.
2 Insert the Adaptec Ultra160 ASPI & SCSI driver for NetWare
created with the Toshiba Server Setup Tool in the floppy disk
drive.
3 Select “Select an additional driver” first, and select “Install an
unlisted driver ” next.
4 Press the key to retrieve drivers contained in the
floppy disk.
5 When the driver list appears, select the following driver.
6 Input slot Number “10011” to ADPT160M Parameters
Proceed with installing operation following the instructions that
appear on the screen.
Selecting the RAID Controller driver
After selecting the driver following the procedure of the previous
section “Selecting the SCSI Riser Card Controller driver,” follow
the procedure mentioned below:
|| MEGAIDE.HAM || Netware NWPA HyperDisk HAM Driver ||
|| ADPT160.HAM || Adaptec Ultra160 ASPI & SCSI Driver