Removing the screw, 7 slide the server out of the rack, Sliding the server (rack type) into the rack – Toshiba Magnia Z300 User Manual

Page 90: 3 connect the cables disconnected

Installing and Removing Hardware
Removing and replacing the server panels

Removing the screw

7 Slide the server out of the rack.

Sliding the server (Rack Type) into the rack

1 Gently slide the server into the rack, according to the rack

assembly procedure step 10 - 15.

2 When it is located in place, fix the server with four screws.

When turning the claw screws, remove the front panel so that
you do not catch your fingers.

3 Connect the cables disconnected.

Screw (M3)