Tascam 2488neo - Manual (Page 63)

TASCAM 2488neo
63
7 − Recorder
This deletes all the audio material in the selected track
or tracks.
The IN and OUT points do not have any meaning here.
There is only one value that you can change:
Src. Trk Selects the tracks for erasing the audio data. You
can select a single track (1 through 24), a pair of tracks
(1/2, 3/4, etc.), all the tracks (1-24) or virtual tracks that
have not been assigned to physical tracks (Vtrack).
Press YES/ENTER to perform the operation or NO/EXIT to
leave this screen.
CLEAN OUT
CLONE TRACK
This copies a track or pair of tracks to another track or
pair of tracks. The IN and OUT points do not have any
meaning here. There are two values that you can change:
Src. Trk Select an individual track (1 through 24), or a pair
of tracks (1/2, 3/4, 5/6, etc.) or the MASTER stereo track.
Dst. Trk This sets the destination track or tracks to
which the source track is cloned. What you can select here
depends on what you have selected for the source track.
If you have selected a single track, you can select tracks 1
through 24 here. If you have selected a pair of tracks (for
instance, 1/2 or MASTER), you can only select track pairs
(1/2, 3/4, etc.) here.
Press YES/ENTER to perform the operation or NO/EXIT to
leave this screen.
If you try to select the same track as a destination that
you have selected as the source, when you press the
YES/
ENTER key, a pop-up message will appear.
Redo the operation with a different set of tracks.
SILENCE
This function is equivalent to recording silence between
the IN and OUT points on the chosen track or tracks.
OUT
OUT
IN
IN
No material is added or deleted, and the length of the result
is therefore the same as that of the original.
There is only one value that you can change:
Src. Trk Select an individual track (1 through 8), a pair of
tracks (1/2, 3/4, 5/6, etc.), or all the tracks (1-24).
Press YES/ENTER to perform the operation or NO/EXIT to
leave this screen.