4 − recording – Tascam 2488neo User Manual

Page 27

TASCAM 2488neo

4 − Recording

8 Use the cursor keys and the dial to move around the

display and change values. The settings are shown
as numbers and as a graph.

Use the on-screen

on the left side of the display (or

use

SHIFT

and

YES/ENTER

to turn the EQ on, and

use

SHIFT

and

NO/EXIT

to turn the EQ off) to com-

pare the sound with and without the equalization.

9 Press and hold down the

RECORD

key and press

the

PLAY

key. The

PLAY

and

RECORD

indicators

above the transport keys both light, and the

REC

key of track 1 lights solidly.

If you want to rehearse while listening to a metro-
nome click before recording, press the

RHSL

key to

enter rehearsal mode before conducting the above
operation. In rehearsal mode, if you press the

PLAY

key while pressing the

RECORD

key, a recording

rehearsal starts and you can hear the metronome
click without actually recording.

10 The metronome you set up earlier starts to play,

and you can play your rhythm part along with it,
recording as you go. Press the

STOP

key when you

are finished.

11 To return to the zero position, where your song

began, press and hold the

STOP

key, and press the

REW

key (marked as

RTZ

—“return to zero”).

12 When you’ve finished recording, press channel 1’s

REC

key to save the track.

13 Press the

CLICK

key and the indicator goes out.

14 Press the

PLAY

key and listen to the recorded

sound. To re-record press the

REC

key for track 1

again and repeat from step 9.