Copy insert, Move paste, Copy – Tascam 2488neo User Manual
Page 61: Insert, Move, Paste, 7 − recorder
TASCAM 2488neo
61
7 − Recorder
COPY
®
INSERT
This function takes the section of a track or tracks marked
by the IN and OUT points, copies it, and places it on the
chosen track or tracks, inserting it as new material, starting
at the TO point.
OUT
IN
TO
OUT
IN
TO
The original source is left unchanged.
The insert operation adds the copy source audio material
after the TO point. Nothing is overwritten on the destina-
tion, as any existing material following the TO point is
moved to the end of the newly-inserted section. The desti-
nation is longer than it was before the operation.
You can copy the section more than once in one operation.
You can change the following values:
Src. Trk This sets the source track or tracks from which
the section is copied. Choose 1 through 24 to select an
individual track. Choose 1/2, 3/4, 5/6 etc. to select a pair of
tracks. Choose 1-24 to select all tracks.
Dst. Trk This sets the destination track or tracks into
which the selected section is inserted. What you can select
here depends on what you have selected for the source
track. If you have selected a single track, you can select
tracks 1 through 24 here. If you have selected a pair of
tracks (for instance, 1/2), you can only select track pairs
here. If you have selected all tracks (1-24), then 1-24 is the
only option available to you here.
Times This is the number of times that the selected sec-
tion is inserted (end-to-end) in the destination track or
tracks. You can set this value from 1 to 99.
Press
YES/ENTER
to perform the operation or
NO/EXIT
to
leave this screen.
This function takes the section of a track or tracks marked
by the IN and OUT points, and moves it to the chosen track
or tracks, starting at the TO point.
OUT
IN
TO
OUT
IN
TO
After the operation, the selected section of the source
between the IN and OUT points is replaced by silence.
This operation overwrites anything which is already
recorded at the destination. The destination is therefore the
same length as it was before the operation.
You can change the following values:
Src. Trk This sets the source track or tracks from which
the section is taken. Choose 1 through 24 to select an indi-
vidual track. Choose 1/2, 3/4, 5/6, etc. to select a pair of
tracks. Choose 1-24 to select all tracks.
Dst. Trk This sets the destination track or tracks to which
the selected section is moved. What you can select here
depends on what you have selected for the source track.
If you have selected a single track, you can select tracks 1
through 24 here. If you have selected a pair of tracks (for
instance, 1/2), you can only select track pairs here. If you
have selected all tracks (1-24), then 1-24 is the only option
available to you here.
Press
YES/ENTER
to perform the operation or
NO/EXIT
to
leave this screen.
MOVE
®
PASTE