Selecting mic effects, Editing mic effects, 6 − effects – Tascam 2488neo User Manual
Page 40: Saving mic effects in the library
40
TASCAM 2488neo
6 − Effects
1 When the
MICX4
key is pressed (regardless of
whether eight or four mic effects have been select-
ed), and the
SELECT
key of the input or track is
pressed, the MIC EFFECT screen is shown:
2 Press the
SELECT
or
INPUT
key for the track or
input channel to assign the mic effect to it. The MIC
EFFECT screen for that channel appears.
3 Press the
YES/ENTER
key.
MIC EFFECT LIBRARY screen appears.
4 Use the left and right keys to select either the preset
(
PRESET
) library, the user library (
USER
) or save
(
SAVE
) the current setting.
The basic types of mic effects available are:
• Vocal compressor (
CMP
)
• De-esser (
DSR
)
• Vocal exciter (
EXC
)
• Noise suppressor (
NSP
)
5 Use the dial to select the effect to load (or when
saving, the “slot” in which to save).
6 Press
YES/ENTER
to load (or save) the effect. The
selected settings are recalled as mic effect settings
for the current channel, and the MIC EFFECT
screen shows the parameters.
Pressing
NO/EXIT
cancels the load and returns the
settings to the previous parameters.
Selecting mic effects
The parameters to be edited for the effects differ according
to the type of effect selected. See
for details about editing the parameters of different types
of effects.
T I P
If you are unsure of the operation of a compressor or
any of the effects described here, it is a good idea to
read one of the many excellent introductory books on
audio and recording.
NOTE
Even if no mic effects are assigned, you can still edit
the parameters on each channel. You must assign the
mic effects in order to use them.
Editing mic effects
Edited settings can be saved in the library as user settings.
1 With the MIC EFFECT screen open, press the
YES/ENTER key to open the MIC EFFECT
LIBRARY screen.
2 Use the
У
/
Б
cursor keys, and select SAVE.
3 Use the JOG/DATA dial to select a slot to save the
setting.
4 As necessary, give it the name that you want (see
“Titling” on page 15).
NOTE
The three letters that show the type (CMP, DSR, EXC,
NSP) cannot be changed.
5 Press the YES/ENTER key.
The setting is saved and the MIC EFFECT screen
reopens.
If you press the NO/EXIT key, the MIC EFFECT
screen reopens without saving the setting.
Saving mic effects in the library