Toshiba TLPX10E - Manual (Page 79)

79
CONTENTS
Document
imaging camera
Normally, this camera automatically adjusts the color balance to project the picture. If the
adjustment is not sufficient, follow the steps below to lock the white balance.
1 Project a white paper and enlarge it to fill the
screen.
Notes
• If you raise up the arm while the camera input is selected, the color of the picture may vary for
an instant due to the automatic white balance adjustment. This is not a malfunction.
• If you put back the arm and raise it up while the white balance is locked (the LOCK indicator is
lit), the projector releases the white balance.
Lock the white balance
LOCK W.BALANCE
TEM P LA MP ON BUSY FAN
ON/S TAND BY
KEYS TONE SET AUTO AUTO
EXIT ENTE R MEN U INPU T
VOL/A DJ.
STORE CAMER A ARM LIG HT
LOCK W.BALA NCE GAIN
FO CU S
2
LOCK
STORE IMAGE
CAMERA
ARM LIGHT W.BALANCE
CAMERA GAIN
TEMP LAMP ON BUSY FAN
ON/ST ANDBY
KEYST ONE SET AUTO AUTO
EXIT ENTER MENU INPUT
VOL/ADJ .
STORE
CAMER A ARM LIGHT
LOCK W.BALANCE GAIN
FOCUS
2 Press W.BALANCE to turn the LOCK indicator
on.
The white balance is locked.
To release the white balance, press W.BALANCE again to turn
the LOCK indicator off.
Camera
control panel