Full menu settings – keystone (continued), A 4-a 4-b 4-b, Adjustments & settings – Toshiba TLPX10E User Manual
Page 63: Press vol/adj (+/-) to adjust and set, Press enter
63
Adjustments &
Settings
LASER
MENU
ON/STANDBY
INPUT
L-CLICK
R-CLICK
ENTER
KEYSTONE
AUTO
SET
EXIT
PIP
FREEZE
MUTE
CALL
RESIZE
VOLUME/ADJUST
TEMP LAMP
ON
BUSY
FAN
KEYSTONE
SET
AUTO
AUTO
EXIT
ENTER
MENU
INPUT
VOL/ADJ.
5
5
4-a
4-a
4-b
4-b
TEM
P LA
MP
ON
BUSY
FAN
ON/ST
ANDB
Y
KEYST
ONE
SET
AUTO
AUTO
EXIT
ENTER
MEN
U
INPU
T
VOL/A
DJ.
ON/STANDBY
Y/P
B
/P
R
Keystone
Recalibrate the horizontal reference value
for keystone.
Are you sure ?
Yes
No
Horizontal referrence value reset
MENU
EXIT
QUICK
Select
Back
ENTER
Enter
FULL MENU settings – Keystone (continued)
When selecting “Keystone” in step 3.
Press VOL/ADJ (+/-) to adjust and set.
(-)
(+)
Keystone: To reduce the lower width
To reduce the upper width
Notes
• If the power is turned off by pressing the ON/STANDBY button, the adjustments or settings made are
automatically stored in the memory. If the power cord is unplugged or if a power failure occurs while the
projector is on, the adjustments or settings are not stored in the memory.
• The “Keystone” adjustments and settings are applied to all the input sources. (It is impossible to store
different adjustments and settings for each input source.)
When selecting “Horizontal reference value reset” in step 3.
4-b
Press ENTER.
The sub-menu of “Horizontal reference value reset” appears.
Use the selection buttons ( / ) to select
“Yes” and press ENTER.
The horizontal reference value is reseted.
4-a
5
After the adjustments and settings are finished,
press EXIT several times until the menu screen
disappears.
Press the EXIT button once when the FULL MENU is
displayed, press twice when the sub menu is displayed.
EXIT
EXIT
ENTER
ENTER
ENTER
ENTER
Remote control
Control panel
(Main unit side)