Toshiba TDP-TW300 - Manual

Reconfigurable and Intelligent Systems Engineering Group
Department of Computer Science and Engineering
Indian Institute of Technology Madras, Chennai - 600 036.
Toshiba Data Projector TDP-TW300
Document prepared by A Balaji and Noor Mahammad Sk
The RISE Group equipped with a Toshiba Data Projector TDP-TW300. This doc-
ument explains the usage of the projector.
The LCD Projector usage instructions as follows:
1. Plug the power cable of the projector to the power supply box.
2. Plug the monitor output from the CPU to the input1 of the projector. (The
input1 socket is available at the backside of the projector).
3. Now TURN-ON the the switch that is available at the backside of the pro-
jector.
4. Press the ON/ST ANDBY button that is available on the topside of the
projector. (Please press Once only).
5. Wait for few minutes. (Lamp in the projector will take some time to turn on).
6. If you have any problem in the display then follow the following instructions:
• Click the EasySetup button that is available on the top of the projec-
tor. Wait for some time.
• Still if you have any problem in the display, Adjust the focus, the
F ocus
button is available on the top side of the projector.
7. Steps to be followed for T urningOF F of the projector:
• Press the ON/ST AN DBY button twice. This button is available on
the top side of the projector. This will turn-off the display.
• Even after turning off the display wait for few minutes until all the
indicators that are available on the top-side of the projectors goes off.
• Now turn-off the backside switch of the projector.
8. If you have any problem in the operation then please refer to the projector
manual.
1