Omron CQM1H-CLK21 - Manual (Page 89)

66
Wiring Section 3-3
End Plate: PFP-M (2 Plates required per Repeater Unit)
3-3 Wiring
3-3-1 Communications Cables
Using the specified twisted-pair cable, connect all nodes using the multidrop
method.
Communications Cables
The following shielded twisted-pair cables should be used for Controller Link
Network connections.
Note 1. Use the specified cable only.
2. Keep communications cables separated from power lines or a high-tension
lines to prevent influences from electronic noise.
PFP-100N2
PFP-100N/50N
BD
BD
SHLD
H
L
g
#
Controller Link Unit
Terminating resistance
switch (ON) Terminating resistance
switch (ON) Terminating resistance
switch (OFF) Terminating resistance
switch (OFF)
Model Manufacturer
Li2Y-FCY2 x 0.56 qmm Kromberg & Schubert,
Komtec Department
1 x 2 x AWG – 20PE + Tr.CUSN + PVC Draka Cables Industrial
#9207 Belden
ESVC 0.5 x 2 C Bando Densen Co.
ESNC0.5X2C-99-087B Japan Electric Wire & Cable Co.