beautypg.com

About this manual, Xiii – Omron CQM1H-CLK21 User Manual

Page 12

background image

xiii

About this Manual:

This manual describes the installation, setup, and operation of the C200HW-CLK21, CS1W-CLK21-
V1, CJ1W-CLK21-V1, CVM1-CLK21, and CQM1H-CLK21 Controller Link Units for C200HX/HG/HE,
CS/CJ-series, CVM1, CQM1H-series, and CV-series PLCs, and includes the sections described
below. The Controller Link Units are used to connect these PLCs to a Controller Link Network. Infor-
mation is also provided in this manual on CS1W-RPT01/02/03 Repeater Units. The following three
manuals are directly related to application of the Controller Link Network.

Depending on the system, you may also need the CX-Programmer, or a Programming Console. Refer
to the body of this manual for details. Please read this manual and related manuals carefully and be
sure you understand the information provided before attempting to install and operate a Controller Link
Unit.

Precautions provides general precautions for using the Controller Link Unit and related devices.

Section 1 provides basic information on Controller Link Networks, and will give the reader an overview
of what Controller Link Networks can do and how best to use them.

Section 2 describes the basic procedures to use the Controller Link Unit. The settings necessary for
using each of the functions are also explained briefly. For more details, refer to the following sections
on individual functions.

Section 3 describes how to install a Controller Link Unit and how to wire the Controller Link Network.
Details are also provided on installation, wiring, and basic operating procedures of Repeater Units,
including information on using them to construct networks.

Section 4 describes the settings required for starting communications. These basic settings are
required for both data links function and the message service. Carry out the settings described here
before turning on power to the Controller Link Unit.

Section 5 describes how to use data links in a Controller Link Network. Refer to SECTION 2 Basic
Procedures
for an outline of data link application.

Section 6 explains how to use the message service provided by a Controller Link Unit. It also explains
the FINS commands and responses supported by Controller Link Units and those supported by
C200HX/HG/HE, CVM1, and CV-series PLCs.

Name

Contents

Cat. No.

(suffixes omitted)

SYSMAC CS1W-CLK21, CJ1W-CLK21,
C200HW-CLK21, CVM1-CLK21.
CQM1H-CLK21 Controller Link Units
Operation Manual (this manual)

Installation, setup, and operating procedures for the Con-
troller Link Units. Controller Link Units are used to connect
PLCs to a Controller Link Network.

W309

3G8F7-CLK12-E-V1/CLK52-E-V1/
CLK21-E-V1 Controller Link Support
Boards for PCI Bus
Operation Manual

Operating procedures for Controller Link Support Boards
for PCI bus connections. Controller Link Support Boards
are used to connect IBM PC/ATs or compatibles to a Con-
troller Link Network.

W383

3G8F7-CLK12-E/CLK52-E/CLK21-E Con-
troller Link Support Boards for PCI Bus
Installation Guide

Installation and setup procedures for Controller Link Sup-
port Boards for PCI bus connections. Controller Link Sup-
port Boards are used to connect IBM PC/ATs or
compatibles to a Controller Link Network.

W388

3G8F5-CLK11-E, 3G8F5-CLK21-E Con-
troller Link Support Boards for ISA Bus
Operation Manual

Installation, setup, and operating procedures for Controller
Link Support Boards for ISA bus connections. Controller
Link Support Boards are used to connect IBM PC/ATs or
compatibles to a Controller Link Network.

W307

CS1W-CLK12, CVM1-CLK12 Optical
Ring Controller Link Units
Operation Manual

Installation, setup, and operating procedures for the Optical
Ring Controller Link Units. Controller Link Units are used to
connect C200HX/HG/HE CV-series, and CS-series PLCs
to a Controller Link Network.

W370

C200HW-ZW3AT2-E-V2 Controller Link
Support Software
Operation Manual

Installation and operating procedures for the Controller
Link Support Software. The Controller Link Support Soft-
ware enables manually set data links and other procedures
for a Controller Link Network.

W369

This manual is related to the following products: