1-7 wire-to-optical (h-pcf) repeater unit, Wire-to-optical (h-pcf) repeater unit, Repeater unit indicators – Omron CQM1H-CLK21 User Manual
Page 79
56
Component Names and Functions
Section 3-1
3-1-7
Wire-to-Optical (H-PCF) Repeater Unit
Repeater Unit Indicators
O
N
1
2
O N
1
2
DC24V
INPUT
SL1
SL2
T/R2
T/R1
PWR
CS1W-RPT02
BD L
SHLD
BD H
TER SW
ON
ON
SW1
BAUD
RATE
1
2
+
−
SL1 Terminal Block for Communications
Cable
Terminals to connect to the Controller
Link Network communications cable
(twisted-pair cable).
Baud rate switch
Power Terminal Block
Terminals to connect to the
power supply (24 V DC) that
drives the Repeater Unit.
Indicators
LED indicators that display the status of the
Unit and communications.
Terminating Resistance Switch for SL1
Turn ON this switch when the Repeater Unit is
connected to the SL1 communications cable
terminal block at either end of the Controller Link
Network.
Optical Connector SL2
Connects to communications cable
(H-PCF optical fiber cable) of the
Controller Link Network.
Name
Color
Status
Meaning
PWR
(Power supply)
Green
Lit
Power supply is ON.
Not lit
Power supply is OFF.
T/R1
(SL1 communicat-
ing)
Yellow
Lit
Transmission signal is being sent or
received.
Not lit
No transmission signal.
TR2
(SL2 2 communicat-
ing)
Yellow
Lit
Transmission signal is being sent or
received.
Not lit
No transmission signal.