Ricoh H545 - Manual (Page 79)

Forwarding
63
4
If you delete the RTI/CSI
A Press the {{{{No}}}} key.
Important
❒ If you delete all the RTIs and
CSIs for a forwarding station,
you must also delete the for-
warding station (see step
B).
If you do not do this, all in-
coming messages will be for-
warded to that station.
❒
B Press the {{{{Yes}}}} key. Then go
back to step
DDDD.
G
Press the
{{{{Yes}}}} key to store it as a
wild card.
FORWARD Y/N
SET RTI/CSI?
Otherwise
A Press the {{{{No}}}} key.
H
Press the
{{{{Function}}}} key to finish.
Edit or input another RTI/CSI for
this forwarding station:
A Press the {{{{Yes}}}} key and Go to
step
DDDD.
To work on another forwarding
station:
A Press the {{{{No}}}} key. Go to step
BBBB.
Important
❒ If you switch the forwarding
on and program no RTI/CSI,
all incoming messages are
forwarded.
Switching forwarding on / off
(Function 62)
Before you use Forwarding, you have
to switch it on using Function 62. If it
is switched off, the machine will not
forward any incoming fax messages.
A
Press the
{{{{Function}}}} {{{{6}}}} then en-
ter the access code
{{{{2}}}} {{{{2}}}} {{{{2}}}} {2}.
Then press
{{{{6}}}} {{{{2}}}} and the {{{{Yes}}}}
key.
Y/NEXTi
SELECT LINE
B
Scroll through the list of features
with
V V V V until the screen is as
shown.
Y/NEXTi
FORWARDING ON/OFF
C
Press the
{{{{Yes}}}} key.
FORWARDING Y/hi
ON iOFF
D
Change the on/off setting by
pressing
W W W W or V V V V.
E
Press the
{{{{Yes}}}} key.
F
Press the
{{{{Function}}}} key to finish.
Selecting which messages to
forward
To choose which messages are for-
warded, adjust bit 7 of switch 8 with
the User Parameters. Two settings are
available.
• Forward all incoming messages
from specified senders (bit 7=0).