Ricoh H545 - Manual (Page 47)

Dial Options
31
3
Dial Options
The Dial Options provide access to
various F-code features which are de-
signed to allow confidential transmis-
sion and polling reception between
different makers' fax machines. Use
them if the other party's fax machine
is of a different make and supports
the F-code features. Before you can
use the Dial Options, you need to pro-
gram Quick Dial key 29 as the Dial
Option key if you have not done so al-
ready (see below for details).
Programming The Dial Option
Key
This procedure describes how to set
up Quick Dial key 29 as the Dial Op-
tion key.
A
Press
{{{{Function}}}} {{{{3}}}} {{{{1}}}} then the
{{{{Yes}}}} key.
ak QUICK/hi
PRINT LISTh/SEARCHi
B
Press Quick Dial key
{{{{29}}}}.
a29 PROGRAM? Y/hi
C
Press the
{{{{Yes}}}} key.
a29 PROGRAM? Y/N
PROG. DIAL OPTION?
D
Press the
{{{{Yes}}}} key.
ak QUICK/hi
PRINT LISTh/SEARCHi
E
Press the
{{{{Function}}}} key.
Using the Dial Options
To use the Dial Options, do the fol-
lowing after you have dialed the des-
tination fax number and before you
press the
{Start} key.
A
Press the Dial Option key (Quick
Dial 29) .
Y/N
SUB? (S)
B
Do one of the following :
• If you wish to set the SUB code
for confidential transmission to
different makers' machines, press
the
{Yes} key.
TRANSMIT Y/START
55512345
• To skip SUB, press the
{No} key
then go to step
D for polling recep-
tion from different makers' fax ma-
chines.
C
Enter the SUB code on the ten key
pad then press the
{{{{Yes}}}} key.
Y/N
SEP? (P)
D
Do one of the following:
• If you wish to set the SEP code,
press the
{Yes} key.
TRANSMIT Y/START
555512345S9999P