beautypg.com

Connecting the machine, 8connecting the machine – Ricoh H545 User Manual

Page 178

background image

Installation

162

8

Connecting The Machine

Before using the machine, connect the machine to the telephone line properly.
Then plug in the power cable and switch on.
Make sure the machine is properly connected to the telephone line and the pow-
er outlet, as shown following.
Do not switch on until everything is connected properly.
Program the Telephone Line Type setting (use Function 62; see P.167 “Setting
The Phone Line (Function 62)”). If your telephone normally sends out tones (touch
tone) when dialing, use the TT setting; if it normally sends out pulses (rotary di-
al), use the DP setting. Also, make sure that the switch on the handset is set up
correctly.

See also other documents in the category Ricoh Printers: