Ricoh H545 - Manual (Page 183)

Initial Settings & Adjustments
167
8
Note
❒ Should be the same as in step D.
M
Press the
{{{{Yes}}}} key.
PROGRAMMED will flash on the dis-
play and you'll get the display.
READY 100% 10:00AM
SET DOC. OR DIAL NO.
Setting The Access Number
A
Press the
{{{{Function}}}} {{{{6}}}} then enter
the access code
{{{{2}}}} {{{{2}}}} {{{{2}}}} {2}.
Then enter
{{{{6}}}} {{{{1}}}} and the {{{{Yes}}}}
key.
Y/NEXTi
SET OWN NUMBER
B
Press
V V V V until the following dis-
play is shown.
Y/NEXTi
SET PSTN ACCESS NO.
C
Press the
{{{{Yes}}}} key.
NUMBER KPAD/N
kk
D
Enter the number which you use
to access an outside line.
NUMBER KPAD
0k
E
Press the
{{{{Yes}}}} key to store your
setting, then press the
{{{{Function}}}}
key.
Setting The Phone Line
(Function 62)
A
Press the
{{{{Function}}}} {{{{6}}}} then enter
the access code
{{{{2}}}} {{{{2}}}} {{{{2}}}} {2}.
Then enter
{{{{6}}}} {{{{2}}}} and the {{{{Yes}}}}
key.
Y/NEXTi
SELECT LINE
B
Press the {{{{Yes}}}} key.
SELECT LINE Y/hi
iTT PD
Note
❒ TT = Touch Tone
❒ PD = Pulse Dial
C
Press W W W W and V V V V to set your machine
for a tone dial line ( TT ) or a pulse
dial line ( PD ).
SELECT LINE Y/hi
TT iPD
D
Press the
{{{{Yes}}}} key.
PROGRAMMED will flash on the dis-
play and you'll get the display.
E
Press the
{{{{Function}}}} key.
READY 100% 10:00AM
SET DOC. OR DIAL NO.
Setting The Date & Time
(Function 91)
A
Press the
{{{{Function}}}} {{{{6}}}} then enter
the access code
{{{{2}}}} {{{{2}}}} {{{{2}}}} {2}.