Raymarine autopilot control unit - Manual (Page 59)

42 ST7000 Plus Autopilot Control Unit Owner’s Handbook
Recommended Settings
This section details the calibration settings for sailing/power
displacement and planing power vessels. Once you have set the Pilot
Type, these will provide good performance for initial sea trials and can
be fine tuned later to optimise performance.
After initial calibration has been carried out, further adjustment can be
made at any time.
The adjustable features are listed in a table at the end of this section,
Use this table to record your settings for future reference. Information
on the functions of the different settings is given in the remainder of
this section.
The following points should be noted:
• Make sure that the autopilot is in Standby mode before you access
Dealer Setup.
• Setup options are always automatically saved on exit.
Pilot Type
This should be set when the system is first switched on. The default
settings for other Dealer Setup options depend on the pilot type you
select here.
118ch04.p65 07/01/99, 12:42 42