Raymarine autopilot control unit - Manual (Page 22)

Chapter 2: Basic Operation 5
Distance Units
Distance units are shown as either nm (nautical miles) or SM (statute
miles). If neither nm nor SM is displayed, the displayed distance is in
kilometres.
2.3 Start Up Conditions
When the ST7000 Plus is first switched on, it is in Standby mode with
the display showing the vessel’s current compass heading.
You can return to manual steering at any time by pressing standby
momentarily, to return to Standby mode.
2.4 Using Auto Mode
Safety
Although autopilot control can considerably ease the task of
sailing a vessel, its use must never lead to the erosion of good-
seamanship. ALWAYS maintain a permanent watch, no matter
how clear the sea may appear to be.
Remember, a large ship can travel two miles in five minutes - just
the time it takes to make a cup of coffee.
Engaging the Autopilot (AUTO)
1. Steady the vessel on the required heading.
2. Press auto.
D4208-1
• In Auto mode, the display shows the locked autopilot heading.
118ch02.p65 07/01/99, 12:41 5