Raymarine autopilot control unit - Manual (Page 32)

Chapter 2: Basic Operation 15
Waypoint names of five characters or less (as at A above) are displayed
at the right of the screen. Waypoint names comprising more than five
characters (as at B above) are centralised on the screen, alternating
with the Data Page name.
When waypoint names have more than nine characters, only the first
nine characters are displayed.
2.8 Remotely Controlling ST60 and ST80 Instruments
On vessels where the ST7000 Plus is used with ST60 or ST80
instrumentation, you can use the ST7000 Plus to control these
instruments (both standard 110 mm, and Maxiview instruments).
However, before attempting to operate ST60 or ST80 instruments in
this manner, ensure the instrument grouping has been defined (see
Chapter 4, Customising the System).
D4325-1
Replication of the key-layout of the currently-
selected standard instrument.Thus, for
example,if you press resp, the selected
instrument responds as though its left-most
key has been pressed, and so on.
Controlling a standard
instrument
Controlling a Maxiview
instrument
Chapter
select
Page
select
Select instrument
All instrument types
118ch02.p65 07/01/99, 12:41 15