Roland VS-880EX - Manual (Page 87)

40. “FX2 MstIns=” appears in the display. Rotate the
TIME/VALUE dial. If you wish to insert effect 2
into the master out, select “On.” If not, select
“Off.” If effect 2 has been inserted in another
channel, the display will indicate “—” and this
item cannot be set.
41. Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
42. “Change Routing ?” appears in the display. Press
[YES]. When the routing has been finalized,
“Complete” appears in the display, and you will
return to Play condition. If you decide to discard
the routing that was set, press [NO].
Saving the Current Routing (User Routing)
1. Use Template or Step Edit to finalize the routing
that you wish to save.
2. Press [EZ ROUTING] several times until
“SaveCurRouting ?” appears in the display.
3. Press [YES].
The number and name of the user routing will be dis-
played.
4. Use the TIME/VALUE dial to select the routing
number for the desired save destination.
5. Press PARAMETER [ ].
6. Use CURSOR [ ] [ ] to move the cursor.
Use the TIME/VALUE dial to assign a name to
the user routing.
7. Press PARAMETER [ ].
The cursor will move to the routing number.
8. Press [YES].
9. If you are overwriting a previously saved user
routing, a message will ask for confirmation. Press
[YES].
10. When the user routing has been saved,
t”Complete” appears in the display, and return to
Play condition.
Recalling User Routing
1. Press [EZ ROUTING] several times until “User
Routing ?” appears in the display.
2. Press [YES].
The number and name of the user routing will be dis-
played.
3. Use the TIME/VALUE dial to select the routing
number that you wish to recall. If not even one
user routing has been saved, “EZR No User
Routing” appears in the display, and return to
step 1.
4. Press [YES].
5. When the user routing has been recalled,
“Complete” appears in the display, and return to
Play condition.
Deleting User Routings
1. Press [EZ ROUTING] several times until
“DelUserRouting ?” appears in the display.
2. Press [YES].
The number and name of the user routing will be dis-
played.
3. Use the TIME/VALUE dial to select the routing
number that you wish to delete. If not even one
user routing has been saved, “EZR No User
Routing” appears in the display, and return to
step 1.
4. Press [YES].
A confirmation message is displayed.
5. Press [YES].
6. When the user routing has been deleted,
“Complete” appears in the display, and you will
return to Play condition.
CONDITION MARKER#
MASTER INPUT TRACK AUX
TIME
48
24
4
0
dB
12
CONDITION MARKER#
MASTER INPUT TRACK AUX
TIME
48
24
4
0
dB
12
Routing Number Routing Name
Chapter 5 Storing Mixer Settings
87
Chapter 5