Roland VS-880EX - Manual (Page 39)

Moving the Location of Markers
1. Press [PLAY (DISPLAY)].
2. In the display, the “MARKER” field will indicate
the marker number of the current location. Use
CURSOR [
] [ ] to move the cursor to the
MARKER field, and rotate the TIME/VALUE
dial.
Making Fine Adjustments to Marked
Locations
1. Move to the marker where you want to change.
Press [PREVIOUS] or [NEXT] to move the marker.
2. Press [LOCATOR] several times until “LOC ***”
appears in the display (*** is the marker number
that you wish to modify).
3. Set the marker where you wish to change. Use the
TIME/VALUE dial. The time of a marker can be
modified only within the range between the pre-
ceding and following markers.
4. Press [PLAY (DISPLAY)].
Return to Play condition.
Deleting a Marked Location
Setting markers makes it much easier to search for
places within a song, but having too many of them
actually cam make it more difficult to find the location
you’re looking for. It is a good idea to delete unneeded
markers whenever you can.
1. Move to the marker you wish to delete. Press
[PREVIOUS] or [NEXT] to move the marker.
2. While holding down [CLEAR], press [TAP].
Delete the marker. Marker numbers for any markers
after the deleted mark point shift one number ahead.
To Delete All Markers Simultaneously
1. Hold down [SHIFT] and [CLEAR] and [TAP] at
the same time.
2. “Clear ALLMarker ?” appears in the display. If
you want to delete the markers, press [YES]. If
you want to cancel the procedure, the press [NO].
0 1 1 1 2
Time
Possible range of change
0 1 3 4 2
Time
Before deleting a Marker
TAP CLEAR
+
0 1 2 3
Time
After deleting a Marker
0 1 3 4 2
Time
Before deleting a Marker
TAP CLEAR
+ +
SHIFT
Time
After deleting a Marker
Chapter 2 Basic Operation
39
Chapter 2