Roland VS-880EX - Manual (Page 75)

Recalling Recording Settings
(Recording/Template)
Select this when you want to record the performance
input via the INPUT jacks. Recall a preset routing
(recording) which has been pre-registered when the
VS-880EX was shipped.
1. Press [EZ ROUTING] several times until “EZR
Recording ?” appears in the display.
2. Press [YES].
“EZR Use Template” (do you wish to apply the tem-
plate?) appears in the display.
3. Press [YES].
4. When the routing has been recalled, “Complete”
appears in the display, and return to Play condi-
tion. At this time, the mixer settings will be as fol-
lows.
INPUT Jack Recording Track
INPUT 1 1
INPUT 2 2
INPUT 3 3
INPUT 4 4
INPUT 5 5
INPUT 6 6
DIGITAL IN1 (7) 7
DIGITAL IN1 (8) 8
Display (parameter name) Input Track
Mixer Mixer
ATT current value current value
Phase current value current value
MIX Sw Off On
MIX Level 100 100
MIX Pan 0 (IN7=InsertL, IN8=InsertR) 0
V.Track - currently
selected
V-track
EQ Switch On -
EQL (Gain) 0 dB -
EQL (Frequency) 300 Hz -
EQM (Gain) 0 dB -
EQM (Q) 0.5 -
EQM (Frequency) 1.4 kHz -
EQH (Gain) 0 dB -
EQH (Frequency) 4 kHz -
FX1 Ins Off (IN3=InsertL, IN4=InsertR) Off
FX2 Ins Off Off
AUX Sw Off Off
Display (parameter name) Input Track
Mixer Mixer
Fader Link Off Off
Channel Link Off Off
EFFECT1 Off Off
EFFECT2 Off Off
Display (parameter name) Master Block
Master Sel MIX
EQ Mode 3band
Direct Out Off
Master FX1 Ins -
Master FX2 Ins -
Display (parameter name) Effect
FX1 Sel A96:DualComp/Lim
FX2 Sel A96:DualComp/Lim
Recalling Track Bouncing Settings
(Bouncing/Template)
Select this when recording the performance data from
multiple tracks onto a number of other tracks. Recall a
preset routing (bouncing) which has been pre-regis-
tered when the VS-880EX was shipped.
1. Press [EZ ROUTING] several times until “EZR
Bouncing ?” appears in the display.
2. Press [YES].
“EZR Use Template” (do you wish to apply the tem-
plate?) appears in the display.
3. Press [YES].
4. When the routing has been recalled, “Complete”
appears in the display, and return to Play condi-
tion. At this time, the mixer settings will be as fol-
lows.
Recording Track: TRACK 7–8
Input jack/track/effect assigned to the recording
track:
INPUT 1–6
DIGITAL IN1 (7/8)
TRACK 1–6
FX1 Return
FX2 Return
Chapter 5 Storing Mixer Settings
75
Chapter 5