Roland VS-880EX - Manual (Page 83)

29. Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
30. “Use EFFECT2 ?” appears in the display. If you
wish to use effect 2 press [YES], and make settings
for effect 2 as described in steps 15–28. If you do
not wish to use effect 2, press [NO] and proceed
to step 31.
31. “TR* AUX Snd” appears in the display. Rotate the
TIME/VALUE dial. If you wish to send the play-
back track to the AUX bus, select either “Pre” or
“Pst,” and proceed to step 32. If you do not wish
to send the playback track to the AUX bus, select
“Off,” and proceed to step 36.
32. Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
33. “TR* SndLev =” appears in the display. Use the
TIME/VALUE dial to adjust the send level.
34. Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
35. “TR* SndPan” appears in the display. Use the
TIME/VALUE dial to adjust the send pan.
36. Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
37. “Master Sel=” appears in the display. Use the
TIME/VALUE dial to select the bus (MIX, AUX,
FX1, FX2, REC) that you wish to output from the
MASTER jacks.
38. Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
39. “EQ Sel=” appears in the display. Rotate the
TIME/VALUE dial.
40. Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
41. “Direct Out =” appears in the display. Rotate the
TIME/VALUE dial. If you do not wish to use
Direct OUT, select “Off.” If you wish to output
tracks 1–4, select “1-4.” If you wish to output
tracks 5–8, select “5-8.”
42. Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
43. “FX1 MstIns=” appears in the display. Rotate the
TIME/VALUE dial. If you wish to insert effect 1
into the master out, select “On.” If not, select
“Off.” If effect 1 has been inserted in another
channel, the display will indicate “—” and this
item cannot be set.
44. Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
CONDITION MARKER#
MASTER INPUT TRACK AUX
TIME
48
24
4
0
dB
12
CONDITION MARKER#
MASTER INPUT TRACK AUX
TIME
48
24
4
0
dB
12
CONDITION MARKER#
MASTER INPUT TRACK AUX
TIME
48
24
4
0
dB
12
CONDITION MARKER#
MASTER INPUT TRACK AUX
TIME
48
24
4
0
dB
12
CONDITION MARKER#
MASTER INPUT TRACK AUX
TIME
48
24
4
0
dB
12
Chapter 5 Storing Mixer Settings
83
Chapter 5