Roland Vs-880 - Manual (Page 128)

9. Set the track status of track 1–4 to PLAY, and the track
status of tracks 7 and 8 to REC. Then playback the
song and adjust the way in which effects are applied.
When you finish adjusting, record.
Use the track channels 1 and 2 ÒAUX LevelÓ and the
master section AUX knob to adjust the signal level sent
to the external effect unit. Use the faders of input chan-
nels 1 and 2 to adjust the signal level from the effect.
However this will change depending on the effect
device that you use, so it is best to adjust the volume
level on the external effect device, and fix the VS-880 at
an appropriate volume level.
Chapter 11 Taking advantage of the VS-880 (ideas and examples)
128