Ricoh JP8000 - Manual (Page 58)

Operation
38
1
F
Enter the vertical original size
with the number keys and press
the
{{{{q q q q}}}} key.
Note
❒ To change the value entered,
press the
{Clear/Stop} key and
enter the new value.
❒ Up to 999mm, 99.9" can be en-
tered.
G
Enter the vertical print size with
the number keys, and then press
the
{{{{q q q q}}}} key.
H
Enter the horizontal original size
with the number keys, and then
press the
{{{{q q q q}}}} key.
I
Enter the horizontal print size
with the number keys.
J
Press the [OK] key.
The machine will select appropri-
ate reproduction ratios for the ver-
tical and horizontal directions.
K
Make sure that the original and
the print paper are the correct
size.
L
Place your original on the expo-
sure glass or in the optional docu-
ment feeder.
M
Press the
{{{{Start}}}} key.
N
Check the image position of the
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the [Image
= = = =] key (⇒ P.23 “Adjusting the
Position of Printed Images”).
O
Make your prints.