Ricoh JP8000 - Manual (Page 265)

Printing Preparations
17
1
When you use standard paper
(47.1 g/m
2 to 105 g/m 2 , 12.5 lb to
28 lb)
A Adjust the side plates to match
the paper size scale on the end
plate side.
CCCC
Lower or lift the paper alignment
wings by turning the left and
right knobs.
Note
❒ When the guides are up, you
might not be able to load the
u nit to full capacity (1,000
sheets) depending on the paper
you are using.
❒ Lift the paper alignment wings
if B5
L prints are curled.
When you use 81.4 g/m 2 , 21.6 lb
or thicker paper
A Lower the paper alignment
wings.
When you use 81.4 g/m 2 , 21.6 lb
or thinner and B5 or smaller
paper
A Lower the paper alignment
wings.
When you use 81.4 g/m 2 , 21.6 lb
or thinner and A4, 8 1 /
2
× 11" or
larger paper
A Lift the paper alignment wings.
When you use A4, 8 1 /
2
"
× 11"KL
paper
A Swing out the guides as shown
in the illustration.
DDDD
Turn on the main switch.
Note
❒ You can have the machine dis-
play how much ink and master
are left when you switch it on.
See “User Tools—Ink/Master
Left” on p.146 “4. Mode Set-
ting”.
ZDZY020E
TPEH021E