Mode setting, P.142 “4, P.142 “4. mode – Ricoh JP8000 User Manual
Page 162: Setting, P.142 “4. mode setting” ), P.142 “4. mode setting, P.142 “4. mode set, Ting, Setting” . yo
User Tools
142
4
4. Mode Setting
No.
Mode
Description
1
Auto Cycle ON/
OFF
Specifies whether Auto Cycle mode is selected at power on.
Note
❒ Default: ON
2
Class Manual Set
You can use one original or multiple originals in Manual Class
mode.
Note
❒ Default: Std. (One original)
3
Ignore Paper Size If you are making prints on non-standard paper and the original
image does not entirely appear on the print, set paper size detec-
tion to “Ignore”. The machine will not detect the paper length.
Note
❒ Default: Not to ignore
4
No Orig. Size DF
When you set long originals in the optional document feeder, set
original detection to “Ignore”. The machine will not detect the
original size.
Note
❒ Default: Not to ignore
5
No Orig. Size
When you place originals of non standard sizes on the exposure
glass, set original detection to “Ignore”. The machine will not de-
tect the original size.
Note
❒ Default: Not to ignore
6
Background ON/
OFF
When you make prints in Photo, Letter/Photo, or Tint mode, the
background of the prints might become dirty. Turn Background
On to improve the clarity of your prints.
Note
❒ Default: W/O back. correction (off)
7
Longer Paper
You can select whether you can use paper longer than 432mm,
17.0" or not.
Note
❒ Default: Not to use
8
Combine
If you select “Automatic (Auto Combine mode)”, you can make
two or four identical images on one sheet by pressing the
{Com-
bine
} key and {Start} key.
Note
❒ Default: Normal (Combine Originals mode)
Reference
For using Auto Combine mode,