Ricoh JP8000 User Manual
Page 136
Operation
116
1
Limitation
❒ To use “16 one-sided originals → 1 one-sided print of 16 images” mode, the
optional document feeder is required.
❒ If the calculated ratio is under the minimum ratio, it is corrected within the
range of the ratio automatically. However, with some ratios, parts of the im-
age might not be copied.
❒ The machine cannot copy originals different in size and direction.
Note
❒ The number of originals printed (combined) can be 4, 8, or 16.
❒ In this mode, the machine selects the reproduction ratio automatically. This
reproduction ratio depends on the print paper size and the number of origi-
nals.
❒ When the original is placed at a different direction from the print paper, the
machine automatically rotates the original image by 90
° to match the print pa-
per direction.
❒ You can set the machine to cancel Memory Combine mode after finishing
your print job with the user tools. See “Cancel Comb.”
❒ Refer to the following table when you select the original and paper sizes.
❖
❖
❖
❖ Placing originals in the optional document feeder (metric version)
*1
You can use these original and paper sizes in Combine 4, 8, 16 Originals mode.
*2
You can use these original and paper sizes in Combine 4, 8 Originals mode.
*3
You can use these original and paper sizes in Combine 4 Originals mode.
❖
❖
❖
❖ Placing originals in the optional document feeder (inch version)
*1
You can use these original and paper sizes in Combine 4, 8, 16 Originals mode.
*2
You can use these original and paper sizes in Combine 4, 8 Originals mode.
*3
You can use these original and paper sizes in Combine 4 Originals mode.
Original A3
L
B4
L
A4
KL
B5
KL
A5
KL
Paper
A3
L
B4
L
--
A4
KL
--
--
B5
KL
--
--
--
Original 11"
× 17"L
8
1
/
2
"
× 14"L
8
1
/
2
"
× 11"KL
8
1
/
2
"
× 5
1
/
2
"
KL
Paper
11"
× 17"L
8
1
/
2
"
× 14"L
--
8
1
/
2
"
× 11"KL
--
--
5
1
/
2
"
× 8
1
/
2
"
L
--
--
--