C” paper misfeeds in the paper exit section – Ricoh JP8000 User Manual
Page 193
x Clearing Misfeeds
173
5
D
Remove the misfed paper from
the inside as shown in the illus-
tration.
E
If you cannot remove the misfed
paper, remove paper from the
pressure cylinder.
F
Set the drum unit and close the
front door.
Note
❒ For setting the drum unit, ⇒
P.128 “Changing the Color Drum
Unit”
-
-
-
-To prevent paper misfeeds:
If the paper is curled or the original's
leading edge margin is too narrow,
the following action is necessary.
• When you use curled paper, cor-
rect the curl as shown.
• When the leading edge margin of
the original is less than 8mm, 0.32"
or there is a solid image on the
leading edge, insert the original
with the widest margin first or
make a leading edge margin by
making a copy.
*: Less than 8mm, 0.32"
”
x
x
x
x + C” Paper Misfeeds in the
Paper Exit Section
A
Slowly, but firmly pull out the
misfed paper.
-
-
-
-To prevent paper misfeeds:
When thin paper misfeeds in the pa-
per exit section, reduce the printing
speed with the
{W
W
W
W}{V
V
V
V} {Speed} keys
(
Speed”). If you cannot reduce the
printing speed, close the trailing edge
guides or move the end plate toward
the paper delivery tray edge.
Z066