Ricoh JP8000 - Manual (Page 169)

User Tools Menu
149
4
7. On Line Mode
7 Key Operator Code Use to turn Key Operator Code mode on or off.
Note
❒ Default: Not to use
8 Reg/Chg Key-
OpCode You can register or change key operator codes. (up to 4 digits)
9 Restrict. Access In Key Counter mode, you have to set the key counter before
making prints. (To turn on Key Counter mode, contact your
service representative.) If Key Counter mode is on, Restricted
Access is turned on (“To use”) automatically. If you turn Re-
stricted Access off (“Not to use”), you can make prints without
inserting the key counter.
Note
❒ Default: Not to use
No. Mode Description
1 Set aut-O/L def Specifies whether Auto On Line mode is set to On or Off when
power is switched on or after mode settings are cleared.
Note
❒ Default: On
2 Ppr. Size [Online] Specifies the paper size when you press the
{On Line} key.
Note
❒ Default: Auto