Ricoh JP8000 - Manual (Page 380)

Optional Functions
132
2
Color Printing Using the Optional Color
Drum
Color drum units are available as op-
tions in addition to the standard black
unit. For making color prints, a sepa-
rate drum unit is necessary for each
color.
Note
❒ If the ink on the color drum dries,
use the Quality Start mode. See
p.77 “Quality Start Mode”.
Making Color Prints
AAAA
Make sure that the color drum in-
dicator is lit.
BBBB
Press the
{{{{Start}}}} key.
CCCC
Check the image position on the
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the [Image
= = = =] key. See p.24 “Adjusting the
Position of Printed Images”.
DDDD
Make your prints.
Changing the Color Drum Unit
AAAA
Open the front door.
BBBB
Lower the drum unit lock lever
(B1).
Note
❒ Make sure the green light be-
side the drum unit lock lever is
on before sliding out the drum.
If the light is off, close the front
door, wait for five seconds, and
then open.