Ricoh JP8000 User Manual
Page 164
User Tools
144
4
13
Setting Q.start
If the machine is not used for a long period of time, the ink on the
drum might dry causing image quality to deteriorate. The Auto
Quality Start mode automatically recovers image density quality
after a selected time has passed. If Auto Quality Start mode is set
to “Not to use”, you can regain print quality by making a few ex-
tra prints or you can use the Manual Quality Start mode.
Note
❒ Default:
• Before print: Yes
• After print: Yes
14
No. of Q.start
You can select how many times the drum unit idles after the fol-
lowing time periods have passed in Auto Quality Start mode.
Note
❒ Default: ⇒ P.154 “4-14 No. of Q.start”.
❒ To increase the print image density, increase the number of
drum rotations, and vice versa.
Reference
For changing the number of idle spins,
15
Deflector Angle
You can change the angle of the wing guide depending on the pa-
per type you use.
Note
❒ Default: Auto
❒ Available settings:
• Up (Select this setting when standard thickness or thin pa-
per misfeeds at the paper exit section occur frequently.)
• Down (Select this setting when A4 – B5, 8
1
/
2
"
× 11" thick
paper is not delivered properly to the paper delivery tray.)
16
Auto Class
When you do not use the Job Separation mode, you can select the
machine's condition after each printing set is fed out to the paper
delivery tray.
Note
❒ Default: Stop
❒ Available settings:
• Start printing automatically (After the last page of each
printing set is fed out to the paper delivery tray, the ma-
chine stops for a few seconds. Then, the next cycle begins.)
• Stop (After the last page of each printing set is fed out to
the paper delivery tray, the machine stops. If you press the
{Print} key, the next cycle begins.)
No.
Mode
Description