Ricoh JP8000 - Manual (Page 36)

Operation
16
1
E
Make sure that the paper feed
side plates are touching both
sides of the paper, and then push
the lock lever for the side plates
down to lock the side plates into
position.
Important
❒ Always make sure that you
push the lock lever for the side
plates down to lock the side
plates into position.
Note
❒ Make sure that the paper size
and direction in the panel dis-
play correspond with the actual
paper size and direction set on
the paper feed tray.
Setting Up The Paper Delivery
Tray
A
Raise the paper delivery tray
slightly, and then gently lower it
with your hand.
B
Raise each paper delivery side
plate, and then grasp the side
plate knobs and move the paper
delivery side plates to match the
print paper size.
Note
❒ The inside of the plates should
align with the paper size.
When you use thick paper (128 g/
m
2 to 209.3 g/m 2 , 34 lb to 55.6 lb)
A Adjust the side plates to match
the paper size scale on the
main frame side.
ZDCY041
ZBHH050E
ZDZH180E