User tools menu, System, P.137 “user tools – Ricoh JP8000 User Manual
Page 157: Menu, 4user tools menu
User Tools Menu
137
4
User Tools Menu
Reference
For accessing the user tools,
⇒ P.135 “Accessing the User Tools”.
1. System
No.
Mode
Description
1
Auto Reset
The machine returns to its initial condition automatically after
your job is finished. The automatic reset time can be set from 1 to
5 minutes or off (0 minute).
Note
❒ Default: Off
2
R. Cntr. Display
Use to display the total number of masters and prints.
Note
❒ A trial print delivered to the paper delivery tray after press-
ing the
{Start} key will not be counted.
3
Reset R. Counter
Choose whether the total number of masters and prints is reset.
Note
❒ Default: Not clear
4
mm/inch
Choose the units of measurement shown on the panel display.
Note
❒ Default:
• Metric version: mm
• Inch version: inch
5
Language on LCD The language used for panel display messages can be selected.
Note
❒ Default: English
6
Time Setting
Use to set the machine's internal clock.
Note
❒ The clock must be adjusted if you change the clock to daylight
saving time/summer time, or return to standard time.
Reference
For setting the clock,