Ricoh AFICIO COLOR 6010 - Manual (Page 243)

227
Pr
ojector
Unit
O
peration
8
Press the [Shading] key.
Note
❐ The machine will start shading.
9
Pull out the film strip holder with the base film.
0
Lift the fresnel lens, place the film inside the po-
sitioning sheet, and lower the fresnel lens.
Note
❐ Place the film face down.
❐ If the film is curled, the copy image may be out of
focus. In this case, make the cut out film position
sheet a little smaller than the film size and use it to
hold the film down.
!
If needed, adjust the color, density, or focus.
Reference
For details, ☛ see page 228.
@
If needed, select the copier modes.
Reference
For details, ☛ see page 231.
#
Press the Start key.
$
Choose your next job.
Reference
For details, ☛ see page 232.
TRSR0Z0E
TRSR0P0E
2
1
1: Fresnel lens
2: Film
Selecting the Film Type and Performing Shading