Ricoh AFICIO COLOR 6010 - Manual (Page 237)

221
Pr
ojector
Unit
O
peration
Selecting the Film Type and Performing Shading
35mm Slides Positive
1
Press the [Shading] key.
2
Open the film cover and insert the “P” (Posi-
tive) filter firmly in the left slot as shown in the
illustration.
Note
❐ Be careful to insert the filter as shown, not the other
way around.
❐ Before going to the next step, make sure that fresnel
lens is lowered in position.
3
Press the [Shading] key.
❐ The machine will start shading automatically.
4
Set the film (slide or strip) in the holder.
Reference
Regarding setting the film, ☛ see page 218.
5
While pressing the holder lever to the left, insert
the holder in the right slot.
6
Adjust the holder by sliding it up and down to
position the correct frame for copying.
TRSR0F0E
1
TRSR0Y0E
TRSR0N0E
2
1
1: Filter