Ricoh AFICIO COLOR 6010 - Manual (Page 239)

223
Pr
ojector
Unit
O
peration
5
Press the [Shading] key.
Note
❐ The machine will start shading automatically.
6
Lift the fresnel lens, place the film inside the film
position sheet, and lower the fresnel lens.
Note
❐ Place the film face down.
❐ If the film is curled, the copy image might be out of
focus. In this case, make the cutout film position sheet
a little smaller than the film size and use it to hold the
film down.
7
If needed, adjust the color, density, or focus.
Reference
For details, ☛ see page 228.
8
If needed, select the copier modes.
Reference
For details, ☛ see page 231.
9
Press the Start key.
0
Choose your next job.
Reference
For details, ☛ see page 232.
TRSR0P0E
2
1
1. Fresnel lens
2. Film
Selecting the Film Type and Performing Shading