Selecting the base film (if needed) – Ricoh AFICIO COLOR 6010 User Manual
Page 233
217
Pr
ojector
Unit
O
peration
Selecting the Base Film (If Needed)
Note
❐
When you use negative film for copying, use that film’s appropriate base film for shading.
1
Confirm the manufacture, model name, and ASA
rating of the film you want to use.
2
Select a base film suitable for the film to copy.
Note
❐
The following base film slides have been prepared as accessories.
•
For FUJICOLOR (registered trademark of FUJI PHOTO COMPANY LIMITED.)
•
For AGFA (registered trademark of AGFAGEVAERT AG.)
•
For KODAK (registered trademark of EASTMAN KODAK COMPANY.)
❐
If you use film that does not have suitable base film, you should make the base film yourself.
☛
See page 234.
3
Open the film strip holder and set the base film
in the film strip holder.
Note
❐
The base film must be set sideways in the strip holder.
❐
There is no difference between both sides of the base
film.
4
Close the holder and lock it as shown in the il-
lustration.
Preparing the Film
TRSR0H0E
1
1: Base film