Ricoh AP1400/AP2000 - Manual (Page 79)

PostScript - Setting Up for Printing
59
8
Note
❒ Settings you make here are used as the default settings for all applications.
Making printer settings for a specific application
To make the printer settings for a specific application, open the [Document Prop-
erties] dialog from that application. The following example describes how to
make settings for the WordPad application that comes with Windows NT4.0.
Note
❒ The actual procedures you should follow to open the [Document Properties] dif-
fers slightly depending on the application. For details, see the documentation
that comes with the application you are using.
❒ With some applications, the printer driver's settings are not used, and the ap-
plication's own initial default settings are applied.
❒ Any settings you make in the following procedure are valid for the current
application only.
A
On the [File] menu, click [Print] .
The [Print] dialog appears.
B
Select the printer you want to use from the [Name] list box, and then click
[Properties] .
The Document Properties appears.
C
Make your settings, and click [OK] .
D
Click [OK] to start your printing.
Macintosh - Setting Up for Printing
Making paper settings from an application
A
Open the file you want to print.
B
On the [File] menu, click [Page Setup] .
The [LaserWriter 8 Page Setup] dialog opens.
C
Make sure that the printer you want to use is shown in [Format for:] . Then,
use [Paper] to select the paper size your want to use.
Note
❒ If your printer is now shown in the [Format for:] box, use the pop-up menu
to display a list of available printers.