Ricoh AP1400/AP2000 - Manual (Page 139)

Cleaning the Printer
119
10
R CAUTION:
Type 1 printer
Note
❒ Please refer to the inside of the
front cover of this manual to con-
firm which printer (Type 1 Printer
or Type 2 Printer) you have.
A
Turn the printer's power switch
off.
B
Pull out the plug from the socket.
Remove all the cables from the
printer.
Note
❒ Do not touch the three white
pins on the right front side of
the printer.
C
Pull the paper tray until it stops.
After that, lift it slightly, then pull
it out of the printer.
D
Move the printer to the edge of a
stable table or desk.
Important
❒ Do not put the printer on an un-
stable or tilted surface.
❒ If the optional tray unit is
equipped with your printer, do
not move the printer and the
unit together as they are not se-
curely attached.
❒ When lifting the printer, make
sure that the optional tray unit
is not attached to the printer.
• When lifting the printer, use the
grips on both sides of the printer.
Otherwise, the printer might fall
and cause personal injury.
• When you move the machine,
unplug the power cord from the
wall outlet to avoid a fire or an
electric shock.
• When you pull out the plug from
the socket, grip the plug to avoid
damaging the cord and causing a
fire or an electric shock.
TS3Y270E
TS3M030E