Roland R-1 - Manual (Page 64)

64
Various settings
Procedure E
13 Firmware Ver1.00
fig.system-e.eps
1. With the R-1 stopped, press the MENU button .
You will enter Setup mode.
2. Turn the VALUE dial to select the desired item from the setup menu.
Select 13: Firmware Ver1.00.
* The program version of your R-1 will appear in the “1.00” area.
3. Press the EXIT button or MENU button to leave Setup mode.
If you want to choose another menu item, turn the VALUE dial to select it instead
of pressing the EXIT button or MENU button . To make settings for the menu item
you select, use the appropriate procedure as listed in “System settings (Setup
mode)” (p. 54).
1
ENTER EXIT
2
MENU
Setup mode
Select an item
from the setup
menu
Exit setup mode
R-1_egfis1.book 64 ページ ２００５年１１月１１日 金曜日 午後５時１３分