Roland R-1 - Manual (Page 32)

32
Basic recording methods
The R-1 can use dynamic microphones and the miniature plug-in powered condenser
microphones that are designed to be connected to the recording jack of an MD (Mini
Disc) recorder or the microphone jack of a computer.
If you use a condenser microphone, you must use one that is designed for
plug-in power. If you connect the wrong type of microphone or a conventional
stereo mini-plug microphone, your equipment may be damaged.
fig.conmic-LR.eps
1
Make sure that the R-1’s power is turned off. Set the input volume to the
minimum position.
If anything is connected to the line input jack , the input from the mic input
jack will be ignored. If you want to record via the mic input jack , don’t
connect anything to the line input jack.
2
Turn on the R-1’s power as described in “Connecting the AC adaptor and
turning on the power” (p. 19).
3
Specify the type of file you want to record, as described in “Types of files that the
R-1 can handle” (p. 28). You can use Setup mode 07 Record Mode (p. 54) to
specify the desired setting or to check the current setting.
4
Set the mic type select switch appropriately for the type of microphone you’ve
connected to the mic input jack . -> “Mic type select switch” (p. 15)
Recording with an external microphone
Stereo mic
MIC TYPE
INPUT LEVEL
MIC
L R
R-1_egfis1.book 32 ページ ２００５年１１月１１日 金曜日 午後５時１３分