The r-1’s controls and connectors – Roland R-1 User Manual

Page 12

The R-1’s controls and connectors

fig.panel-1

Internal mic

This is a stereo microphone that’s built into the R-1.
You can’t use the internal microphone if a microphone or other device is connected to
the

mic jacks

line input jacks

. If you want to use the internal microphone,

don’t connect anything to the other input jacks.
When recording via the internal microphone, set the mic type select switch to DYN.

Display

Various information about the R-1’s operating state is shown here.

EFFECT button

Press the

EFFECT button

to switch the effect on/off.

This button will light red when the effect is on.
If you turn this on before or during playback, the effect will be applied to the sound that
is being played back. If you turn this on before or during recording, the effect will be
applied to the sound that is being input; i.e., the sound that has been processed by the
effect will be recorded.
The R-1 provides various effects that let you modify the sound being played back or
recorded, giving the sound more impact or allowing more comfortable listening. You
can also transform the sound to give it a totally new character.

EDIT button

Use this button to make effect settings.
For details on the effects, refer to

“Using effects”

(p. 46). You can make effect settings

regardless of whether the

EFFECT button

is on or off.

R-1_egfis1.book 12 ページ２００５年１１月１１日　金曜日　午後５時１３分