English deutsch français italiano español 53 – Roland R-1 User Manual

Page 53

English

Deutsch

Français

Italiano

Español

Using effects

While in playback or in recording-standby mode, press the R-1’s

EFFECT button

turn it

(lit).

Press the

EDIT button

. You will enter Edit mode.

Use the

VALUE dial

to select the desired type of effect, and then press the

ENTER

button

Each effect has various “parameters” (settings) that adjust the effect. When you
select an effect type, its parameters will have the default settings.
When you change the effect type, the currently set parameter values are cleared.

* If you decide not to change the effect type, press the

EXIT button

or the

EDIT button

to leave

Effect mode.

Now you can select a parameter. Use the

VALUE dial

to select a parameter, and

then press the

ENTER button

* If you decide not to select a parameter, press the

EDIT button

to leave Effect mode.

* If you want to return to the effect selection, press the

EXIT button

Now you can edit the parameter. Use the

VALUE dial

to specify the desired value

for the parameter, and then press the

EXIT button

Press the

EDIT button

to leave Effect mode.

If you want to return to the parameter selection, press the

EXIT button

The effect parameter settings you make are remembered until you change
them.

R-1_egfis1.book 53 ページ２００５年１１月１１日　金曜日　午後５時１３分